Shenzhen Houyi Lighting Co., Ltd.
Products
Contact Us
  • Contact Person : Mr. Sun Ken
  • Company Name : Shenzhen Houyi Lighting Co., Ltd.
  • Tel : 0086-755-29523678
  • Fax : 0086-755-29523578
  • Address : Guangdong,shenzhen,4th Floor, Block C, Heping Industrial Estate, Sanlian Community, Long Hua Street, ShenZhen 518109
  • Country/Region : China
  • Zip : 518000

2012 good hot sale par56 35w LED wall-hung type underwater light with ABS shell for swimming pool

2012 good hot sale par56 35w LED wall-hung type underwater light with ABS shell for swimming pool
Product Detailed
Related Categories:Underwater Lights
par56 35w LED wall-hung type underwater light 1.RGB is OK. 2.remote control. 3.IP68 underwater par56 35w LED wall-hung type underwater light  Detailed Product Descriptionunderwater light 1.RGB is OK. 2.remote control. 3.IP68 underwater 4.good sales after service  

35w LED  wall-hung type underwater light with ABS shell for swimming pool   

1. Applications:

It is used in swimming pools, fountains, scenic ponds’ illumination and decoration.

2.Features:

1. Adopt super-high bright LED as the light source and any single color is available, like red, green, blue, yellow, white and RGB colors. It is remote control.

2. Adopt thick glass as the body shell which is corrosion resistant and quick heat dispelling.3. It is IP684. Longer life-span, above 50,000 hours.

5. Low consumption, energy saving and environmental protecting.

  

6. The  light color will be more easily to heat dissipation. So they has longer life-span than normal dip-LED par56 underwater light.

7. The light is more bright-colored and more penetrating in water than normal dip-LED par56 underwater light.

NameSize (MM)MaterialVoltage(V)LED QuantityPower(W)
LED hang underwater light
260*65ABSAC-12V501pcs≤35

  

Installation procedure

Screw the bracket into the wallMount the clip of the bracket into the hole of the lightScrew the detailed illustrations in the below pictures      

Cautions

Work with AC12V, otherwise the light will be possibly damagedThis light should be installed not deeper than 50cm underwaterThe power wire of the lights shall be joined with other power wire out of the water. Waterproof treatment should be done if the joint is in the water otherwise there is risk for water intrusion.    The light should be in the water for the test of remote function or other functions, and don’t test it more than 3 minutes out of the water otherwise the light will be possibly damaged or caused disfunction . If the user is not available to test it in the water, then please shut off the light every 3 minutes to be cold for the new test   

par56 35w LED wall-hung type underwater light with ABS shell for swimming pool

2012 good hot sale par56 35w LED wall-hung type underwater light with ABS shell for swimming pool



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.